Print this page

Flowers to Plant in Your Garden this Year Featured

Rate this item
(0 votes)

Through the eyes of Paula...

For people who invest in flowers for a nice summer front or backyard, the flowers listed here would provide a wonderful addition to a garden. In addition, the flowers will attract bees, which are crucial in keeping the flowers well and abundant. Here are some suitable flowers to plant this summer.

1. Foxglove Beardtongue: Bloomingin June, the foxglove beardtongue is a tall-stemmed plant that grows about three feet high. The white flowers are tubular and long, providing nectar to honey bees and hummingbirds. The name “beardtongue” comes from the appearance of the hair on the stamen within the flower.

2. Prairie Crocus: The provincial flower of Manitoba, the prairie crocus is a low-growing plant with single stems for each bud. The flowers are either a bright blue or purple with six pointed petals. Flourishing in the late spring and early summer, the flower’s leaves are thin and divided into many segments. The best part of the prairie crocus, however, is that it’s a long-lived perennial, spreading into multiple flowers the longer it remains planted.

3. Wild Chives: From the same family as garlic, chives are easily grown herbs that thrive across the country. The stems are long and thin, but grow in large clusters close to the ground. On each stem, a near-circular purple bloom will attract honey bees during the spring, and remarkably, the plant will repel many unwanted insects. When harvested, the stems can be minced into salads and dips that have a spicy onion-like flavour.

4. Lowbush Blueberry: The lowbush blueberry is farmed commercially in Canada, but also grows wild in pine forests, as the needles provide acidic soil. Although the bush doesn’t flourish in its first few years, in later years, it will provide abundant flowers as well as delicious and easily picked blueberries.

5. Red Raspberry: Like the lowbush blueberry, the raspberry is farmed all over the world, but also grows wild all over Canada. Typically, the plant won’t flower until its second or third year, after which it will offer soft white blossoms with rounded petals. After pollination, there will be an abundance of fruit in the late summer or early autumn, ripe for harvesting.

Read 347341 times Last modified on Monday, 20 June 2016 23:10
Monday, 20 June 2016 23:00

12974 comments

  • Comment Link Diplomi_nqpt Thursday, 10 July 2025 13:53 Diplomi_nqpt

    Мы предлагаем документы институтов, расположенных в любом регионе Российской Федерации. Заказать диплом любого университета:
    vacantes.educergia.com/employer/diplomirovans

  • Comment Link купить дрова березовые_yzSl Thursday, 10 July 2025 13:23 купить дрова березовые_yzSl

    kupit-drova-v-spb-365.ru .

  • Comment Link JoshuaNem Thursday, 10 July 2025 11:58 JoshuaNem

    Инновационные решения в сфере автомоек: роботизированные и умные мойки
    В современном мире автоматизация и интеллектуальные технологии активно внедряются в различные сферы бизнеса, и автомойки — не исключение. Сегодня всё больше владельцев автосервисов и предпринимателей выбирают робот мойку или умную мойку, чтобы повысить эффективность, снизить издержки и обеспечить клиентам высокий уровень сервиса.
    мойка робот под ключ
    Что такое робот мойка и умная мойка?
    Робот мойка
    Это автоматизированное оборудование, которое использует роботизированные системы для мойки автомобилей. Такие системы могут включать портальные мойки, роботизированные установки и бесконтактные автоматические станции. Основные преимущества — высокая скорость и качество мойки, минимальное участие человека и возможность обработки различных типов транспортных средств.

    Умная мойка
    Это концепция, объединяющая автоматические системы с интеллектуальными технологиями, позволяющими управлять процессом через мобильные приложения или порталы. Включает мойки под ключ самообслуживания, сеть умных моек — портал для управления несколькими станциями, а также интеграцию с системами оплаты и мониторинга.

    Виды автоматических и роботизированных моек
    Автоматические мойки бывают различных типов: полностью автоматические станции, портальные системы, роботизированные установки и мойки самообслуживания. Они отличаются по стоимости, скорости и уровню автоматизации. Например, автоматическая бесконтактная автомойка — это быстрая и бесконтактная станция, подходящая для больших потоков клиентов, а робот мойка — более технологичное решение с возможностью мойки грузовиков и автомобилей премиум-класса.

    Роботизированные системы позволяют обеспечить высокое качество мойки с минимальным износом оборудования, а также снизить расходы на обслуживание. В Москве и других крупных городах популярны решения, такие как робот мойка в Москве или робот мойка автомобилей в Москве, которые позволяют открыть бизнес с минимальными затратами и высокой рентабельностью.

    Технологии и оборудование для автомоек
    Ключевыми компонентами являются роботы для мойки автомобилей, оборудование для мойки самообслуживания, а также системы автоматической и бесконтактной мойки. Например, роботомойка — это современное решение, которое позволяет автоматизировать весь процесс и обеспечить высокое качество обслуживания. Цена на оборудование для роботизированных мойок под ключ начинается примерно от 2 миллионов рублей и выше, в зависимости от комплектации и уровня автоматизации.

    Франшизы автомоек, такие как франшиза робот мойка, позволяют предпринимателям быстро запустить бизнес, используя проверенные модели и бренды. Также популярны готовые бизнес-проекты, например, купить готовый бизнес автомойки в Москве или купить автомойку в Москве от собственника.

    Особенности и преимущества роботизированных мойок в Москве и России
    Робот мойка в Москве и других крупных городах становится всё более востребованной благодаря своей эффективности и современному подходу. Такие системы позволяют снизить расходы на персонал, повысить качество мойки и обеспечить круглосуточную работу без перерывов. Цена на робот мойку под ключ с установкой в Москве обычно начинается от 2 миллионов рублей, что делает такие решения доступными для среднего и крупного бизнеса.

    Открытие автомойки робот или мойки под ключ — перспективное направление для инвестиций, особенно при использовании современных технологий и автоматизированных систем. В Москве существует множество предложений по оборудованию, франшизам и готовым бизнес-проектам, что позволяет выбрать оптимальный вариант для любого бюджета.

    Бизнес-план и развитие
    Основные шаги для открытия роботизированной автомойки включают выбор подходящего места, проектирование и получение разрешений, закупку оборудования и его установку. Важным аспектом является создание портальной мойки или мойки самообслуживания, что позволяет привлекать клиентов с разными потребностями.

    Франшизы и готовые бизнес-планы помогают снизить риски и ускорить запуск проекта. В Москве и других городах России популярны решения, такие как робот мойка в Москве или робот мойка автомобилей в Москве, что делает этот сегмент привлекательным для инвесторов.

  • Comment Link Priobresti diplom lubogo yniversiteta!_puma Thursday, 10 July 2025 11:52 Priobresti diplom lubogo yniversiteta!_puma

    купить диплом о среднем arus-diplom3.ru .

  • Comment Link shvexgKi Thursday, 10 July 2025 09:57 shvexgKi

    Thanks for the article. Here's more on the topic https://orenbash.ru/

  • Comment Link Sazrtfm Thursday, 10 July 2025 07:39 Sazrtfm

    Купить диплом на заказ вы сможете через сайт компании. orikdok-2v-gorode-krasnoyarsk-24.online

  • Comment Link AntioneTeach Thursday, 10 July 2025 06:02 AntioneTeach

    “It’s true that both plants are not yet operating at the capacity we originally targeted,” said the Climeworks spokesperson.
    tripskan
    “Like all transformative innovations, progress is iterative, and some steps may take longer than anticipated,” they said.

    The company’s prospective third plant in Louisiana aims to remove 1 million tons of carbon a year by 2030, but it’s uncertain whether construction will proceed under the Trump administration.

    A Department of Energy spokesperson said a department-wide review was underway “to ensure all activities follow the law, comply with applicable court orders and align with the Trump administration’s priorities.” The government has a mandate “to unleash ‘American Energy Dominance’,” they added.

    Direct air capture’s success will also depend on companies’ willingness to buy carbon credits.
    https://tripscan.biz
    трипскан
    Currently companies are pretty free to “use the atmosphere as a waste dump,” said Holly Buck, assistant professor of environment and sustainability at the University at Buffalo. “This lack of regulation means there is not yet a strong business case for cleaning this waste up,” she told CNN.

    Another criticism leveled at Climeworks is its failure to offset its own climate pollution. The carbon produced by its corporate activities, such as office space and travel, outweighs the carbon removed by its plants.

    The company says its plants already remove more carbon than they produce and corporate emissions “will become irrelevant as the size of our plants scales up.”

    Some, however, believe the challenges Climeworks face tell a broader story about direct air capture.

    This should be a “wake-up call,” said Lili Fuhr, director of the fossil economy program at the Center for International Environmental Law. Climeworks’ problems are not “outliers,” she told CNN, “but reflect persistent technical and economic hurdles faced by the direct air capture industry worldwide.”

    “The climate crisis demands real action, not speculative tech that overpromises and underdelivers.” she added.

    Some of the Climeworks’ problems are “related to normal first-of-a-kind scaling challenges with emerging complex engineering projects,” Buck said.

    But the technology has a steep path to becoming cheaper and more efficient, especially with US slashing funding for climate policies, she added. “This kind of policy instability and backtracking on contracts will be terrible for a range of technologies and innovations, not just direct air capture.”

    Direct air capture is definitely feasible but its hard, said MIT’s Buck. Whether it succeeds will depend on a slew of factors including technological improvements and creating markets for carbon removals, he said.

    “At this point in time, no one really knows how large a role direct air capture will play in the future.”

  • Comment Link CurtisVeste Thursday, 10 July 2025 05:43 CurtisVeste

    Скачал NON PRY, и это худшее, что ставил за год. Всё фальшивое: интерфейс с багами, обещания — ложь, никакой приватности. Проверил — нет аудита, нет протоколов. Это 100% мошеннический проект, управляемый Чайчуком и Гондой. Идут по одной схеме: громкие слова — пустая суть.

  • Comment Link JamesZek Thursday, 10 July 2025 05:38 JamesZek

    A nuclear fusion power plant prototype is already being built outside Boston. How long until unlimited clean energy is real?
    анальный секс смотреть
    In an unassuming industrial park 30 miles outside Boston, engineers are building a futuristic machine to replicate the energy of the stars. If all goes to plan, it could be the key to producing virtually unlimited, clean electricity in the United States in about a decade.

    The donut-shaped machine Commonwealth Fusion Systems is assembling to generate this energy is simultaneously the hottest and coldest place in the entire solar system, according to the scientists who are building it.

    It is inside that extreme environment in the so-called tokamak that they smash atoms together in 100-million-degree plasma. The nuclear fusion reaction is surrounded by a magnetic field more than 400,000 times more powerful than the Earth’s and chilled with cryogenic gases close to absolute zero.

    The fusion reaction — forcing two atoms to merge — is what creates the energy of the sun. It is the exact opposite of what the world knows now as “nuclear power” — a fission reaction that splits atoms.

    Nuclear fusion has far greater energy potential, with none of the safety concerns around radioactive waste.

    SPARC is the tokamak Commonwealth says could forever change how the world gets its energy, generating 10 million times more than coal or natural gas while producing no planet-warming pollution. Fuel for fusion is abundant, derived from deuterium, found in seawater, and tritium extracted from lithium. And unlike nuclear fission, there is no atomic waste involved.

    The biggest hurdle is building a machine powerful and precise enough to harness the molten, hard-to-tame plasma, while also overcoming the net-energy issue – getting more energy out than you put into it.
    “Basically, what everybody expects is when we build the next machine, we expect it to be a net-energy machine,” said Andrew Holland, CEO of the Fusion Industry Association, a trade group representing fusion companies around the globe. “The question is, how fast can you build that machine?”

    Commonwealth’s timeline is audacious: With over $2 billion raised in private capital, its goal is to build the world’s first fusion-fueled power plant by the early 2030s in Virginia.

    “It’s like a race with the planet,” said Brandon Sorbom, Commonwealth’s chief science officer. Commonwealth is racing to find a solution for global warming, Sorbom said, but it’s also trying to keep up with new power-hungry technologies like artificial intelligence. “This factory here is a 24/7 factory,” he said. “We’re acutely aware of it every minute of every hour of every day.”

  • Comment Link Cazrhsb Thursday, 10 July 2025 04:14 Cazrhsb

    Мы готовы предложить дипломы любой профессии по разумным ценам. Для нас важно, чтобы дипломы были доступными для большинства наших граждан. Быстро и просто заказать диплом о высшем образовании emploi-securite.com/societes/premialnie-diplom-24